LitaElek 10mm 4 pin L-shape 4-conductor Quick Splitter RGB LED Connector Right Angle Corner Connector for SMD 5050 RGB LED Strip Lights (10pcs)

Price:
Product prices and availability are accurate as of 2019-11-06 15:48:40 GMT and are subject to change. Any price and availability information displayed on http://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

These L shape connectors for RGB multi-Color light strips comes with 2 easy-clasp connectors and a 90 degree L shape PCB board. They are compatible with both non-waterproof and waterproof 10mm RGB 5050 LED light strips. Installation Instructions: 1.Ensure your section of LED light strip is 10mm wide RGB 5050 LED strip and has four contacts (+, B, R and G) and all the contacts are dry and clean. 2.Open the white clasp of the connector. 3.If you have a waterproof LED strip, you should peel off silicon on the surface around soldering/Cutting line area, then insert the LED light strip into the clasp, with the 4 contacts of the led strip under the 4 prongs of the connector- make sure to match the + side of the strip to the + side of the clasp; If you have a non-waterproof LED strip, just insert the LED light strip into the clasp, with the 4 contacts of the led strip under the 4 prongs of the connector- make sure to match the + side of the strip to the + side of the clasp. 4.Close the clasp. 5.Gently pull the LED light strip to confirm you've made a solid connection. 6.Your connection is successfully made! Notice: If the connection is loose, the LEDs will either flicker or not light up. To ensure tight connection and good electrical conductivity, please follow these 2 tips: 1. The L-shaped PCB board is removable and detachable, please move it to the right place to ensure good electrical conductivity. 2. After you have inserted the LED strip into the connector, before you close the cap of the connector, please slightly pull and push the LED strip to adjust the connection point, until you see the LEDs light up. If the LEDs do not light up, please use your finger to press a little hard on the 4 metal contacts in the connector, until you see the LEDs light up. Package Includes 10x 10mm L shape connectors for RGB 5050 LED Strip Light

Product Features

Compatible with both Waterproof and Non-Waterproof SMD 5050 RGB LED strip lights. Not for SMD3528 RGB LED strip lights. 4 channel PCB chip with 2 easy-clasp connectors, Seamless extension for your RGB light strips around sharp corner Simple but effective, tool free, easy installation by clipping system, making neat and good looking LED strips turn corners, couldn't be any easier using these connectors With these L-shaped connectors, you can avoid twisting your led strips which potentially damages your LED strip. Package includes 10pcs L-shaped connectors.